Jigging machines

Offer to attantion of the spacialists 'The catalog of Jigging Machines' produced by

LLC 'Lugansk Machine Building Plant named after A. Parkhomenko'. This catalog includes a list of new jigging machines is manufactured by our enterprise and widely used in the FSU countries and other countries all over the world.

Such machines, as MO424, MO318, MO212, MO208 are well known, having found a wide use in preparation of coal, ferrous, non-ferrous and rare metals, and other mineral raw materials.

Jigging machines of the new generation cover all the requirements in the preparation of ores of ferrous, non-ferrous and rare metals, crushed ferroalloy slag, and so on, and solve various problems of concentration plants.

The accomplished upgrading of the existing jigging machines is significantly improved by their performance that now meets all the requirements to mineral processing equipment. Modular design is a new approach to jigging machines that allows installing these machines directly on their operating site without any additional alterations and readjustment. The module execution of the jigging machines' chambers is a new innovation of our plant, that allows to make an installation in place of exploitation, without the additional alterations, in any possible variant:

  • left or right (according to the direction of transport stream from the load) location of executive tools (pneumatic drives, water collector and other) of machine;
  • by installation of unloading device and unloading device's drive in the left or right position with no matter from which side the other executive branches of machine are set;

The control system of the air-pulsating regime is fitted with the block of forced vibrations with LED matrices. The blocks may be also equipped with a system of additive (induced) vibrations, i.e. the INTAKE Ι cycle, during the downward travel of the processed material includes the additional intake (INTAKE Ι Ι cycle - the imposed vibrations) which allows to use wider possibilities in technical maintenance of the jigging machine on the operation process.

The unloading control system (the drive of the discharging device with an asynchronous (indication) motor) if fitted with the frequency converters 'ALTIVAR'. They have their own and asynchronous drive protection from unloading, especially on the small drive revolutions.

The automated control system developed by the Scientific and Technical Center is manufactured using the state-of-the-art hand-ware components, with regards to the latest achievements in electronics, is highly reliable and simple in maintenance.

Monitoring device, available for option, may be hooked up to control cabinet for the round-and-clock computerized control over the rate of the jigging machine rotary unloaders' rotation, and for the analysis, processing and archiving of the received information on a PC. This device allows controlling the output of the jigging machine, checking the unloading process, and selecting the operating mode without any loss of time.

In 2005 for the first time in the world two air-pulsated jigging machines MO318 manufactured by LLC 'Lugansk Machine Building Plant named after A. Parkhomenko' were used for jigging lumpy iron ores of various classes with lump size - 100 mm at Zapadniy Karazhal Mine of LLC 'Orken', Republic of Kazakhztan with the following results:

Name of jigging products Preparation of ore (100-2,5 mm)
Outlet, % Content, % Extraction, %
General concentrate 61,12 56,61 79,08
General tails 29,39 16,05 10,78
Siftings (2,5+0 mm) 9,49 46,78 10,14
Ore 100,0 43,76 100,0

Jigging machines with beneath-thescreenplate air chambers VBP-4,0x3-R with jigging area 12 m², were used at Lisakovsk Mining and processing Integrated Works of LLC 'Orken' for concentration of crushed oolitic brown iron ores with particle size minus 3 mm. VBP-4,0x3-R jiggs are more efficient than OMR1A jigs used at the enterprise earlier.

Eleven jigging machines VBP-4,0x2-R with jigging area 8 m², have been in operation at Navoi Mining and Processing Integrated Works (Uzbekistan) for over 12 years. These jiggs are noted for their operating reliability and ease of adjustment and maintenance.

Jigging machines MO type are widely used in concentration of diamand-bearing rocks (kimberlitic). AK ARLOSA has replaced practically all jigging machines of MOD and OPM types at its enterprises by VB-2,5x2-P (MO105A), MO212, MO318 jigs. Some improvement of the additive vibrations has made it possible to achieve the average level of diamonds recovery of 95...98%.

Jigging machines of MO type account for 99% of the jigs engaged in coal and anthracite preparation. They are also very popular in processing various ores, both already mentioned iron, gold and diamond-bearing, ant other, such as complex ores, barium and chrome iron ores (Kromtau, Kaztsink, Kazmarganets, Vostochnoe RU, Kazakhstan), manganese ore (Marganets and Ordzhonikidze Mining and Processing Integrated Works), apatites (Kovdor Mining and Processing Integrated Works), fluorites (Bor-Undur Mining and Processing Works, Mongolia).

New models of elevating jigging machines VB-2,3x3-M (screen plate 1,25 m wide, jigging area 7,5 m², with two chambers) have been designed. The machines are meant for processing foundry slogs from ferrochrome and ferromanganese production, ckinker of zinc slogs, for upgrading of mining dump materials, etc.

Movable sieve jiggs are one of the promising developments nowadays.

The specialists of our plant have developed the improved versions of movable sieve jiggs:

  • BKhGd-0,2x1-M (a lab jig, sieve width 0,2 m, jigging surface 0,2 m², output capacity up to 1,5 t/h; heavy fractions are unloaded through a nozzle);
  • BKhGd-4,0x2-M (sieve width 2 m, jigging surface 8 m², output capacity up to 150 t/h; elevator unloading);
  • BKhGd-1,0x3-M (sieve width 1,25 m, jigging surface 5 m², output capacity up to 110 t/h; elevator unloading);
  • BKhGd-4,0x1-M (sieve width 0,4 m, jigging surface 0,4 m², output capacity up to 3,5 t/h; heavy fractions are unloaded through a nozzle);
  • BKhGd-1,0x3-M (sieve width 1,0 m, jigging surface 3 m², output capacity up to 80 t/h; heavy fractions are unloaded through a nozzle);
  • BkhGd-6,0x1; 4,0x1-M (sieve width 2 m, jigging surface 10 m², output capacity up to 250 t/h; elevator unloading).

The Scientific and Technical Center of LLC 'Lugansk Machine Building Plant named after A. Parkhomenko' examines and analyzes the world practice of manufacturing high-quality equipment and creates new items using computer-based technologies. The high professional level of the workers, employees and administration, their ability to work under market conditions makes it possible to solve problems, facing the enterprises of the fuel-and-energy and mining-and-metallurgical sectors.

If you are interested in our jigging machines we are ready to make a separate contract on their producing and delivering, to help with the mounting, starting, maintenance and repair.


Product Image Item Name
Jigging machine VB-2,5x2-R

Jigging machine VB-2,5x2-R

Differential characteristics: forced oscillation unit with light-emitting diode matrix with the function of superimposed oscillations; autonomic...
THE KPO-50 COMPLEX OF PNEUMATIC PREPARATION

THE KPO-50 COMPLEX OF PNEUMATIC PREPARATION

Function: gravity preparation by the method of dry separation of coal, anthracites, ores and other bulk materials with the bulk volume up to 2,8...
THE MO208 JIGGING MACHINE

THE MO208 JIGGING MACHINE

Net area of separation, m2 8 Nominal width of jigging compartment, mm 2000 Function: preparation of ores of ferrous, non-ferrous and rare metals with...
THE MO212 JIGGING MACHINE

THE MO212 JIGGING MACHINE

Net area of separation, m2 - 12 Nominal width of jigging compartment, mm - 2000 Function: preparation of ores of ferrous, non-ferrous and rare metals...
THE MO312 JIGGING MACHINE

THE MO312 JIGGING MACHINE

Net area of separation, m2 - 12 Nominal width of jigging compartment, mm - 3000 Differential characteristics: module execution (pneumatic drive can...
THE MO318 JIGGING MACHINE

THE MO318 JIGGING MACHINE

Net area of separation, m2 18 Nominal width of jigging compartment, mm 3000 Differential characteristics: module execution (pneumatic drive can be...
THE MO424 JIGGING MACHINE

THE MO424 JIGGING MACHINE

Net area of separation: 24 m2. Nominal width of jigging compartment: 4000 mm. Differential characteristics: module execution (pneumatic drive can be...
THE VB-2,5x1-M JIGGING MACHINE

THE VB-2,5x1-M JIGGING MACHINE

Differential characteristics forced oscillation unit with light-emitting diode matrix; the rotary discharging system control is equipped with...
THE VB-2,5x2-B JIGGING MACHINE

THE VB-2,5x2-B JIGGING MACHINE

Differential characteristics: compressed air control in compartments with the help of regulators with electric drive; forced oscillation unit with...
THE VB-2,5x2-M JIGGING MACHINE (without a rotary discharger)

THE VB-2,5x2-M JIGGING MACHINE (without a rotary discharger)

THE VB-2,5x2-M for preparation of ores of ferrous, non-ferrous and rare metals with the lump size up to 4 mm. Technical description ...


Adress:
Europe, Ukraine,
Lugansk 91055
Zheleznodorozhnaya st, 8
Phone:
Country Code: +38
City Code: 0642
91-90-00, 93-17-35, 34-42-65,
34-42-63, 34-42-69, 34-42-67,
91-90-33, 91-90-36
Faks:
Country Code: +38     
City Code: 0642
34-42-72, 93-12-31
e-mail:
info@lmzip.com
Orphus system